STIHL MS151C-E- FLEMING'S STIHL Centre Naas Co. Kildare

STIHL
MS151 C-E
CARVING
SAW

Stihl
MS 151 C-E
CARVING
SAW

LIGHTWEIGHT BACK HANDLE SAW FOR PRUNING AND CARVING

MS151 C-E

The lightest back handle saw by STIHL. Suitable for pruning, snedding, hedge-laying and cutting smaller limbs. This upgraded version of the MS 151 features a new 2-MIX engine that consists of a new cylinder, piston and exhaust. These changes mean there is an increase in power of the saw by up to 1.05kW and a 15% increase in torque to 1.1Nm - all while retaining the lightweight nature of the saw. Fitted with a manual fuel pump and STIHL's ErgoStart (E) technology, this saw is easy to start-up so you can get on with the job straight away. Available with either a 10" or 12" bar and fitted with a 1/4" PM3 saw chain for a finer, precise cut. Also excellent for intricate woodwork when combined with a carving bar. Instruction is necessary to recognize or assess the dangers of a chainsaw. Please wear protective clothing and equipment.
If anything is unclear, we recommend to order the chainsaw via Click & Collect and pickup up the chainsaw from a STIHL servicing dealer.

Very lightweight petrol chainsaw for cutting firewood to length and for tree maintenance
Economical 2-MIX engine
Very precise cutting pattern produced by 1/4” PM3 saw chain
Simple start-up thanks to manual fuel pump and STIHL ErgoStart

Specifications :

STIHL Oilomatic saw chain pitch/type
1/4 " P,1/4" P
Bar length 25-30 cm
Displacement 23.6 cm³
Power output 1.1/1.5 kW/bhp
Rollomatic E, cutting length 25 cm
Weight 2.8 kg (1)
Tank volume 0.20 l
Speed at maximum power 10000 rpm
Bumper spike No bumper spike
Power-to-weight ratio 2.5 kg/kW
Cylinder 4 channel / chrome
Filter material Non-woven fabric
Oil pump Not adjustable
Filter Standard filter
Sprocket Sprocket profile
Chain tensioning Side chain tension
Anti vibration system AV + steel spring
Weight 3.12 / 3.17 kg (2)
Handle type Standard grip
Exhaust Standard silencer
Carburettor
Limiter caps / compensator / flushing template
Sound pressure level 96 dB(A) (3)
Oil tank volume 150 cm³
Sound power level 110 dB(A) (3)
Vibration values left/right 4.9/4.9 m/s2 (4)


1)Without fuel, without bar and chain
2)Without fuel, with bar and chain
3)K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4)K-factor according to DIR 2006/42/EC = 2m / s

Owners / Instruction Manuals
MS 151 C-E Owners Manuel Click Here

Product Videos

STIHL MS151 C-E
Standard equipment:

LIGHTWEIGHT BACK HANDLE SAW FOR PRUNING AND CARVING

STIHL ANTI-VIBRATION SYSTEM

CLICK HERE TO ENLARGE

FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

COMPENSATOR

CLICK HERE TO ENLARGE

REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

STIHL 2-MIX ENGINE

CLICK HERE TO ENLARGE

HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.


STIHL ERGOSTART

CLICK HERE TO ENLARGE

EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.


STIHL FOUR-CHANNEL TECHNOLOGY

CLICK HERE TO ENLARGE

FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

SERVICING-FRIENDLY AIR FILTER SYSTEM

CLICK HERE TO ENLARGE

MAKES CLEANING EASIER. The shroud has been practically designed to be opened with just one movement and without tools. This makes it easier to clean your chainsaw’s air filter.

Tool free fuel caps

CLICK HERE TO ENLARGE

Special caps to open and close the tank cap quickly, easily and without tools.

SIDE-MOUNTED CHAIN TENSIONING

CLICK HERE TO ENLARGE

FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.

MANUAL FUEL PUMP(PURGER)

CLICK HERE TO ENLARGE

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operation.